STYCCOBOND F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents ‘loose-lay’ carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable “lay flat” carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings.See the Recommended Adhesives Guide for details of specific floorcoverings.STYCCOBOND F41 has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations.STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOLATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, Linoleum and Vinyl floorcoverings.

Coverage Rate (Approx.)7 – 20m2 per litre with a roller depending on the absorbency of the subfloor and the backing of the carpet tile.

Drying Time (Approx.)30 minutes depending on temperature, humidity and absorbency of the subfloor.

Availble in 20L & 5L sizes.